反应釜网
不锈钢反应釜
不锈钢反应锅
不锈钢抛光反应釜
蒸汽加热不锈钢反应釜
外盘半管式加热不锈钢反应釜
多功能分散反应釜
不锈钢反应罐
电加热不锈钢反应釜
不饱和聚酯树脂设备
切片机
不锈钢发酵罐
填料系列
不锈钢储罐
储罐
螺旋板式换热器
高速分散机
换热器
塔器设备
结晶器
管式炉
招聘发布_Jobs
优秀的人才团队永远是构筑百年企业的基石,是推动企业持续发展的动力,是企业引领运动潮流的源泉。
您对我们充满梦想,我们对您充满期待......
在线留言_Order
欢迎你选购我们公司的产品!
请您将所需的产品情况填入下面的表格,我们将制定有效的可行性方案给您,我们收到你的订单后会在最短的时间内响应。
新闻中心_News
反应釜>>新闻中心
反应釜物料炭化的解决办法
发布者:admin  日期:2016-05-16  点击:2025

不锈钢反应釜价格较高,微小损坏时没有必要整台设备更新,这就需要选用合适的修补法,否则,就会使反应釜被釜里溶剂腐蚀,搪瓷面的损坏会迅速扩大,并由此造成停产、安全事故及环境污染等不可预计的损失。化工行业中使用的反应釜,因为介质的腐蚀性强、反应条件忽冷忽热、以及运输、使用、人为等问题,总会出现这样那样的搪瓷层损坏,造成生产停止,如大面积脱落,建议选择不锈钢反应釜。

Stainless steel reactorhigher prices. Tiny damage when there is no need to update the whole sets ofequipment, which requires selection of appropriate repair method, otherwise, itwill make reaction kettle kettle solvent corrosion, the enamel surface damagewill expand rapidly, resulting in production, safety accidents andenvironmental pollution, dyeing and other unpredictable loss. The reactor usedin the chemical industry, because of strong corrosive medium, reactionconditions by fits and starts, and transportation, the use of human and otherproblems, there is always a kind of enamel layer is damaged, due to stopproduction, such as off a large area, it is recommended to choose stainlesssteel reactor.

从不锈钢市场了解到这种金属筛网价格不贵质量也不错,对于小不锈钢反应釜也可以自己设计制造。大规格的不锈钢反应釜则可请不锈钢反应釜制造厂加工。接下来为大家介绍这种不锈钢反应釜底的这几原理和制作理念。因为所有的问题都是因为固体反应物料沉淀到不锈钢反应釜底造成的。那么主要的解决办法就是要在即使没有混合或搅拌的情况下也要避免发生沉淀。这可通过加进一个辅助的不锈钢反应釜底而实现,该辅助的不锈钢反应釜底比实际的要稍高一点,留出310厘米的间隙。这样固体反应物将沉淀在这个辅助的不锈钢反应釜底上,而不会在实际的不锈钢反应釜底上形成绝热层。

From the stainless steelmarket to understand the metal screen is not expensive and good quality, forthe small stainless steel reactor can also design and manufacture their own.Large size of the stainless steel reactor can be asked to stainless steel reactormanufacturing plant processing. Next to introduce the principle and idea ofmaking this stainless steel reaction kettle. Because all of the problems aredue to solid reaction material to the stainless steel reaction kettle bottomcaused by precipitation. So the main solution is to avoid precipitation even ifthere is no mixing or stirring. It by adding an auxiliary stainless steelreaction kettle bottom and the realization and the auxiliary stainless steelreaction kettle bottom than the actual to slightly higher, leaving 3 ~ 10 cmgap. This solid reactant will be deposited in the auxiliary stainless steelreaction kettle without actual stainless steel reaction kettle bottom formationheat insulating layer.

通过不锈钢反应釜底间隙间的对流作用热传递将是连续均匀的。 辅助的不锈钢反应釜底用高强度不锈钢(SS314)制成,上面带有许多小孔,孔径比反应物料的粒径略小,将这种筛网切成圆形。其边缘向下弯曲作支撑,当固体反应物料负荷很重时,辅助底下面可以加一个金属环作为支承。这样便可避免固体物料集中在不锈钢反应釜底。

Through the convection heattransfer between the stainless steel reactor bottom gap will be continuous anduniform. Auxiliary stainless steel reaction kettle is made of high strengthstainless steel (SS314) and above with a plurality of small holes, apertureratio of reactants particle size smaller, will this kind of screen intocircular. The edge is bent down as a support, and when the solid reactionmaterial load is heavy, the auxiliary bottom can be added with a metal ring asa support. This is to avoid the solid material in stainless steel reaction kettle(www.gfanyingfu.com).

文章来源:http://www.gfanyingfu.com/news.asp?lt=329
[返回] [打印]
公司:无锡联盛石化装备制造有限公司 Copyright © www.gfanyingfu.com 反应釜网 All reserved. 
联系人:周锡军 先生 电话:0510-85918899 0510-85912299 手机:13606183220 15306183220 传真:0510-85917799 地址:江苏无锡市滨湖区胡埭工业园龙胆路18号
无锡联盛石化装备制造有限公司专业生产电加热反应釜等设备的专业厂家,价格实惠,欢迎咨询! 技术支持:优易网